DIY Plumbing Guide

To effectively use a plunger, you need to create a good seal between it and the toilet bowl. Now give the toilet a few good plunges to clear up any leftover blockage and try to flush the toilet again. Give a few good up and down strokes with the plunger and try to flush the toilet. One way to know that it may be time to call in a professional is if water is backing up into the sinks or showers whenever you flush. If the toilet in a bathroom is close to the sink, items like toothbrushes and toothpaste caps can also find their way into toilet bowls. Very few homes today continue to use radiator heat, but pipes can still bang and squeak even in new homes. If you follow these few tips then you should be able to defeat the embarrassing situation of clogging a toilet and unclog it like a pro. If your toilet is clogged try using a plunger first, then a plumbers snake (if you have one) to unstop it. Water backing up into odd locations when you flush means that you have a clogged main line. You get done doing your business and flush the toilet.

About The Author Pat Perkins is a copywriter for Yodle Local, a business directory and online advertising company. About The Author Stuart Baldick is an Expert Plumber in Lakeland, Florida. Before you contact a plumber or HVAC specialist, you may want to estimate the size you think you will need to enable you to compare the prices of units that meet your estimated size requirement and then budget as necessary for a new one. If the formerly clear water has any color from the substance that you put in the tank then it has a leak and probably will need a replacement stopper and valve seat. To prevent unwanted doo-dads from clogging your toilet, train your children to put the lid down when they have finished and to use it only for toileting purposes. Children sometimes mistake toilet bowls for personal marinas, floating everything in them from ducks, boats and fish to bars of soap.

If it is wide open, cold water rushes into the toilet tank nearly as fast as water rushes out of a faucet that is turned to the full on position, robbing the shower of cold water momentarily. If you happen to be up on your roof cleaning gutters and downspouts, flush the drain-waste and vent systems too by running you garden hose into them for several minutes at full flow. In some cases where there is a low level of water in the toilet bowl, pouring a bucket of water from chest high level into the bowl will force a flush. But if the toilet starts overflowing again, you need to close the flapper again and repeat the plunge and flush progression until your clog is gone. But to your complete dismay, instead of the water going down, it starts coming up, along with everything else thats in the bowl.

DIY Plumbing Guide of every toilet which

If the water clears the bowl then you have successfully unclogged it. If the water successfully drains from the toilet, then you have effectively unclogged it. Turn off the main water valve that serves your home and then check your water meter. There is a valve at the base of every toilet which adjusts the degree of pressure with which the water runs into the toilet tank. You can check for leaks in your toilet by adding a few drops of food coloring or several tablespoons of Kool-Aid or instant coffee to the toilet tank. This will stop the flapper from releasing more water from the tank into the bowl and will allow you to stop the flood BEFORE it happens. If this is the case, you may want to have a plumber install a pressure-reducing valve which will take care of the problem. This is accomplished by opening the drain valve and draining about 5 gallons into a bucket until the water runs clear. Turn the water off at the main shutoff valve. Close the faucets and turn the water on again. Twice a year you should drain the sediment that accumulates at the bottom of the water heater.